Module 2

Tent Build Instructions

Bill of Materials (BOM)
To fulfil tent dimensions (2ft x 3ft x 6ft) we will need the following sized PVC pipes:
4 x 6 ft PVC pipes 
4 x 2 ft PVC pipes 
4 x 3 ft PVC pipes 

5 x  1 in. x 10 ft. PVC Schedule 40 Plain-End Pipe

• Price: $4.16 each = $20.80

2  x    1 in. Furniture Grade PVC 3-Way Elbow in White (4-Pack)

• Price: $8.80 each = $17.60

0.5 x    36 in. x 100 ft. Charcoal Fiberglass Screen

• Sharing screen with another group
• Price: $52.98/ 2 = $26.49

1 x   5 ft. x 3/4 in. Sticky Back Tape 

• Price: $7.47

1 x Hot Glue Gun and 50 glue sticks 

• Price: $9.99

4 x 1 in. Schedule 40 PVC Coupling

• Price: $0.59 each= $2.36 

4 x 1 in. Schedule 40 PVC Tee

• Price: $1.22 each= $4.88

2 fl. oz. Original Glue (Gorilla Glue)

• Price: $4.97

Ikea Large Shopping Bag (AMAZON)

• Price: $4.40

TOTAL PRICE = $96

ASSEMBLY/DISASSEMBLY INSTRUCTIONS
Tent Frame

1. Assemble the four 6 feet sides by connecting each side as shown. Connect all 'a' sides together, 'b' sides together, 'c' sides together and 'd' sides together. Connect a1 with a1, a2 with a2 etc.
2. Connect all _1 with a PVC TEE and connect all _2 with a PVC coupler.
3. Insert one 1 foot PVC pipe into each TEE hole. You should now have 4 x 6foot long sides with a 1 foot pipe coming out from each side.
4. Assemble the base by attaching 2 x 2 feet PVC pipes with 2 x 3 feet PVC pipes using a 3-way elbow. Make sure the elbows third hole all face the same direction.
5. Insert the 6 feet sides into each elbow, arranging them so that the perturbing PVC pipes are arranged from lowest to highest and all face the centre. 
6. attach elbows to the top of each side
7. connect the top side by inserting the remaining 2x 2 feet and 2 x 3 feet into the elbows. 
8. You have now successfully assembled the tent frame. 

Netting

1.  velcro the attached netting to the frames of the tent, making sure they are secure in place.
2. velcro the netting to the bottom of the frame.

Disassembly

1. Disassemble the same way in which you assembled. 
2. roll up the netting on the sides it is attached to
3. Place all pipes in bag

TRANSFER

1. To transfer our materials we are using an Ikea shopping bag we found on amazon. Once you disassemble all the parts place them in the bag to be transported easily to storage. The bag has a zipper and handles to make the process easier.